Switch Access And Login - ZyXEL Communications MGS-3712F User Manual

Chapter 41 Troubleshooting
Make sure you understand the normal behavior of the LED. See
1
page 43.
Check the hardware connections. See the Quick Start Guide and
2
page 353.
Inspect your cables for damage. Contact the vendor to replace any damaged
3
cables.
Disconnect and re-connect the power cord to the Switch.
4
If the problem continues, contact the vendor.
5

41.2 Switch Access and Login

I forgot the IP address for the Switch.
The default IP address is 192.168.1.1.
1
Use the console port to log in to the Switch.
2
Use the MGMT port to log in to the Switch, the default IP address of the MGMT
3
port is 192.168.0.1.
If this does not work, you have to reset the device to its factory defaults. See
4
Section 5.6 on page
I forgot the username and/or password.
The default username is admin and the default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
Section 5.6 on page
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
354
63.
63.
Section 3.3 on
Section 41.1 on
MGS-3712/MGS-3712F User's Guide