ZyXEL Communications MGS-3712F User Manual page 37

The Switch automatically detects the installed transceiver. Check the LEDs to
3
verify that it is functioning properly.
Close the transceiver's latch (latch styles vary).
4
Connect the fiber optic cables to the transceiver.
5
Figure 10 Transceiver Installation Example
Figure 11 Connecting the Fiber Optic Cables
3.1.3.2 Transceiver Removal
Use the following steps to remove a mini-GBIC transceiver (SFP module).
Remove the fiber optic cables from the transceiver.
1
Open the transceiver's latch (latch styles vary).
2
MGS-3712/MGS-3712F User's Guide
Chapter 3 Hardware Overview
37