ZyXEL Communications MGS-3712F User Manual page 69

In the example network, configure 2 as the port VID on port 1 so that any
untagged frames received on that port get sent to VLAN 2.
Figure 38 Initial Setup Network Example: Port VID
Click Advanced Applications
1
> VLAN in the navigation panel.
Then click the VLAN Port
Setting link.
Enter 2 in the PVID field for
2
port 1 and click Apply to save
your changes back to the run-
time memory. Settings in the
run-time memory are lost when
the Switch's power is turned off.
MGS-3712/MGS-3712F User's Guide
Chapter 6 Initial Setup Example
69