ZyXEL Communications MGS-3712F User Manual page 216

Chapter 24 Multicast
Note: Your Switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.
Figure 111 Advanced Application > Multicast > Multicast Setting > MVR
The following table describes the related labels in this screen.
Table 63 Advanced Application > Multicast > Multicast Setting > MVR
LABEL
Active
Name
Multicast VLAN
ID
802.1p Priority
Mode
Port
216
DESCRIPTION
Select this check box to enable MVR to allow one single multicast VLAN
to be shared among different subscriber VLANs on the network.
Enter a descriptive name (up to 32 printable ASCII characters) for
identification purposes.
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
Select a priority level (0-7) with which the Switch replaces the priority in
outgoing IGMP control packets (belonging to this multicast VLAN).
Specify the MVR mode on the Switch. Choices are Dynamic and
Compatible.
Select Dynamic to send IGMP reports to all MVR source ports in the
multicast VLAN.
Select Compatible to set the Switch not to send IGMP reports.
This field displays the port number on the Switch.
MGS-3712/MGS-3712F User's Guide