Static Trunking Example - ZyXEL Communications MGS-3712F User Manual

Metrogigabit switch
Hide thumbs Also See for MGS-3712F:
Table of Contents

Advertisement

Chapter 17 Link Aggregation
Table 40 Advanced Application > Link Aggregation > Link Aggregation Setting >
LACP (continued)
LABEL
System
Priority
Group ID
LACP Active
Port
*
LACP
Timeout
Apply
Cancel

17.6 Static Trunking Example

This example shows you how to create a static port trunk group for ports 2-5.
162
DESCRIPTION
LACP system priority is a number between 1 and 65,535. The switch with
the lowest system priority (and lowest port number if system priority is the
same) becomes the LACP "server". The LACP "server" controls the
operation of LACP setup. Enter a number to set the priority of an active port
using Link Aggregation Control Protocol (LACP). The smaller the number,
the higher the priority level.
The field identifies the link aggregation group, that is, one logical link
containing multiple ports.
Select this option to enable LACP for a trunk.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports.
Use this row first to set the common settings and then make adjustments
on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Timeout is the time interval between the individual port exchanges of LACP
packets in order to check that the peer port in the trunk group is still up. If
a port does not respond after three tries, then it is deemed to be "down"
and is removed from the trunk. Set a short timeout (one second) for busy
trunked links to ensure that disabled ports are removed from the trunk
group as soon as possible.
Select either 1 second or 30 seconds.
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
MGS-3712/MGS-3712F User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgs-3712

Table of Contents