Configure Vlan Port Settings - ZyXEL Communications MGS-3712F User Manual

9.5.4 Configure VLAN Port Settings

Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q)
settings on a port. See
VLAN. Click the VLAN Port Setting link in the VLAN Status screen.
Figure 52 Advanced Application > VLAN > VLAN Port Setting
The following table describes the labels in this screen.
Table 17 Advanced Application > VLAN > VLAN Port Setting
LABEL
GVRP
Port
*
MGS-3712/MGS-3712F User's Guide
Section 9.1 on page 95
DESCRIPTION
GVRP (GARP VLAN Registration Protocol) is a registration protocol that
defines a way for switches to register necessary VLAN members on
ports across the network.
Select this check box to permit VLAN groups beyond the local Switch.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all
ports. Use this row first to set the common settings and then make
adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Chapter 9 VLAN
for more information on static
103