Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click
2
Apply to save the settings to the run-time memory.
Figure 27 Tutorial: Set VLAN Type to 802.1Q
Click Advanced Application > VLAN > Static VLAN.
3
In the Static VLAN screen, select ACTIVE, enter a descriptive name (VALN 102
4
for example) in the Name field and enter 102 in the VLAN Group ID field.
Select Fixed to configure port 2 to be a permanent member of this VLAN.
5
Clear the TX Tagging check box to set the Switch to remove VLAN tags before
6
sending.
MGS-3712/MGS-3712F User's Guide
Chapter 4 Tutorials
51