Bandwidth Control Setup - ZyXEL Communications MGS-3712F User Manual

Chapter 14 Bandwidth Control

14.2 Bandwidth Control Setup

Click Advanced Application > Bandwidth Control in the navigation panel to
bring up the screen as shown next.
Figure 79 Advanced Application > Bandwidth Control
The following table describes the related labels in this screen.
Table 33 Advanced Application > Bandwidth Control
LABEL
Active
Port
*
Ingress
Rate
Active
Commit
Rate
Active
148
DESCRIPTION
Select this check box to enable bandwidth control on the Switch.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports.
Use this row first to set the common settings and then make adjustments
on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Select this check box to activate commit rate limits on this port.
Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for
the incoming traffic flow on a port. The commit rate should be less than the
peak rate. The sum of commit rates cannot be greater than or equal to the
uplink bandwidth.
Select this check box to activate peak rate limits on this port.
MGS-3712/MGS-3712F User's Guide