ZyXEL Communications MGS-3712F User Manual page 114

Chapter 9 VLAN
Table 20 Port Based VLAN Setup (continued)
label
Outgoing
Apply
Cancel
114
Description
These are the egress ports; an egress port is an outgoing port, that is, a
port through which a data packet leaves. If you wish to allow two
subscriber ports to talk to each other, you must define the egress port for
both ports. CPU refers to the Switch management port. By default it forms
a VLAN with all Ethernet ports. If it does not form a VLAN with a particular
port then the Switch cannot be managed from that port.
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
MGS-3712/MGS-3712F User's Guide