ZyXEL Communications MGS-3712F User Manual page 283

Click IP Application > DiffServ in the navigation panel to display the screen as
shown.
Figure 153 IP Application > DiffServ
The following table describes the labels in this screen.
Table 91 IP Application > DiffServ
LABEL
Active
Port
*
Active
Apply
Cancel
MGS-3712/MGS-3712F User's Guide
DESCRIPTION
Select this option to enable DiffServ on the Switch.
This field displays the index number of a port on the Switch.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports.
Use this row first to set the common settings and then make adjustments
on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Select Active to enable DiffServ on the port.
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Chapter 31 Differentiated Services
283