Configure Your Other Access Points - ZyXEL Communications NWA-3160 User Manual

Chapter 3 Tutorials
Enter the email address to which you want alerts to be sent
3
(myname@myfirm.com, in this example).
In the Send Immediate Alert section, select the events you want to trigger
4
immediate e-mails. Ensure that Rogue AP is selected.
Click Apply.
5

3.4.4 Configure Your Other Access Points

Access point A is now configured to do the following.
• Scan for access points in its coverage area every ten minutes.
• Recognize friendly access points from a list.
• Send immediate alerts to your email account if it detects an access point not on
the list.
Now you need to configure the other wireless access points on your network to do
the same things.
For each access point, take the following steps.
From a computer on the wired network, enter the access point's IP address and
1
login to its Web configurator.
Import the friendly AP list. Click ROGUE AP > Configuration > Browse.... Find
2
the "Flist" file where you previously saved it on the network and click Open.
Click Import. Check the ROGUE AP > Friendly AP screen to ensure that the
3
friendly AP list has been correctly uploaded.
Activate periodic rogue AP detection.
4
Set up e-mail logs, but change the Mail Subject field so you can tell which AP the
5
alerts come from ("ALERT_Access_Point_B", etc.)
56
NWA-3160 Series User's Guide