ZyXEL Communications NWA-3160 User Manual page 106

Chapter 7 System Screens
Table 18 System > Password
LABEL
Use new setting
User Name
Password
RADIUS
Apply
Reset
106
DESCRIPTIONS
Select this if you want to change the RADIUS username and
password the NWA uses to authenticate management logon.
Enter the username for this user account. This name can be up to
31 ASCII characters long, including spaces.
Type a password (up to 31 ASCII characters) for this user profile.
Note that as you type a password, the screen displays a (*) for each
character you type. Spaces are allowed.
Note: If you are using PEAP authentication, this password field
is limited to 14 ASCII characters in length.
Select the RADIUS server profile of the RADIUS server that is to
authenticate management logins to the NWA.
The NWA tests the user name and password against the RADIUS
server when you apply your settings.
• The user name and password must already be configured in the
RADIUS server.
• You must already have a RADIUS profile configured for the
RADIUS server (see Section 11.2 on page
• The server must be set to Active in the profile.
Click Apply to save your changes.
Click Reset to reload the previous configuration for this screen.
159).
NWA-3160 Series User's Guide