ZyXEL Communications NWA-3160 User Manual page 78

Chapter 4 Status Screen
The following table describes the labels in this screen.
Table 8 The Status Screen
LABEL
Automatic Refresh
Interval
Refresh
System Information
System Name
Model
Firmware Version
System Up Time
Current Date Time
WLAN Operating
Mode
Management VLAN This field displays the management VLAN ID if VLAN is active, or
IP
LAN MAC
WLAN MAC
System Resources
Flash
Memory
CPU
WLAN Associations This field displays the number of wireless clients currently
Interface Status
Interface
78
DESCRIPTION
Enter how often you want the NWA to update this screen.
Click this to update this screen immediately.
This field displays the NWA system name. It is used for
identification. You can change this in the System > General
screen's System Name field.
This field displays the NWA's exact model name.
This field displays the current version of the firmware inside the
device. It also shows the date the firmware version was created.
You can change the firmware version by uploading new firmware
in Maintenance > F/W Upload.
This field displays the elapsed time since the NWA was turned on.
This field displays the date and time configured on the NWA. You
can change this in the System > Time Setting screen.
This field displays the current operating mode of the wireless
module (AP, Bridge / Repeater, AP + Bridge or MBSSID).
You can change the operating mode in the Wireless > Wireless
screen.
Disabled if it is not active. You can enable or disable VLAN, or
change the management VLAN ID, in the VLAN > Wireless
VLAN screen.
This field displays the current IP address of the NWA on the
network.
This displays the MAC (Media Access Control) address of the NWA
on the LAN. Every network device has a unique MAC address
which identifies it across the network.
This displays the MAC address of the wireless module.
This field displays the amount of the NWA's flash memory
currently in use. The flash memory is used to store firmware and
SSID profiles.
This field displays what percentage of the NWA's volatile memory
is currently in use. The higher the memory usage, the more likely
the NWA is to slow down. Some memory is required just to start
the NWA and to run the web configurator.
This field displays what percentage of the NWA's processing
ability is currently being used. The higher the CPU usage, the
more likely the NWA is to slow down.
associated with the wireless module. It supports up to 128
concurrent associations.
This column displays each interface of the NWA.
NWA-3160 Series User's Guide