System Status Screen - ZyXEL Communications NWA-3160 User Manual

Chapter 23 Maintenance
uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a
successful upload, the system will reboot. See the Firmware and Configuration
File Maintenance chapter for upgrading firmware using FTP/TFTP commands.

23.2 System Status Screen

Use this screen to get a quick summary of the status of your NWA. Click
Maintenance > System Status. The following screen displays.
Figure 168 Maintenance > System Status
The following table describes the labels in this screen.
Table 80 Maintenance > System Status
LABEL
System Name
ZyNOS Firmware
Version
IP Address
IP Subnet Mask
DHCP
Show Statistics
264
DESCRIPTION
This is the System Name you can configure in the SYSTEM >
General screen. It is for identification purposes
This is the ZyNOS Firmware version and date created. ZyNOS is
ZyXEL's proprietary Network Operating System design.
This is the Ethernet port IP address.
This is the Ethernet port subnet mask.
This is the Ethernet port DHCP role - Client or None.
Click Show Statistics to see the NWA performance statistics such
as number of packets sent and number of packets received for each
port.
NWA-3160 Series User's Guide