Configuring Ssid - ZyXEL Communications NWA-3160 User Manual

Chapter 9 SSID Screen
Table 33 SSID
LABEL
Layer 2 Isolation
MAC Filter
Edit

9.2.1 Configuring SSID

Use this screen to configure an SSID profile. Select an SSID profile in Wireless >
SSID and click Edit to display the following screen.
Figure 86 Configuring SSID
The following table describes the labels in this screen.
Table 34 Configuring SSID
LABEL
Profile Name
SSID
Hide Name (SSID)
Security
RADIUS
140
DESCRIPTION
This field displays which layer 2 isolation profile is currently
associated with each SSID profile, or Disable if Layer 2 Isolation is
not configured on an SSID profile.
This field displays which MAC filter profile is currently associated
with each SSID profile, or Disable if MAC filtering is not configured
on an SSID profile.
Click the radio button next to the profile you want to configure and
click Edit to go to the SSID configuration screen.
DESCRIPTION
Displays the name identifying this profile.
When a wireless client scans for an AP to associate with, this is the
name that is broadcast and seen in the wireless client utility.
Select Disable if you want the NWA to broadcast this SSID (a
wireless client scanning for an AP will find this SSID). Alternatively,
select Enable to have the NWA hide this SSID (a wireless client
scanning for an AP will not find this SSID).
Select a security profile to use with this SSID profile. See
10.2 on page 146 for more information.
Select a RADIUS profile from the drop-down list box, if you have a
RADIUS server configured. If you do not need to use RADIUS
authentication, ignore this field. See
more information.
Section
Section 11.2 on page 159
NWA-3160 Series User's Guide
for