Chapter 23 Maintenance
If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 179 Configuration Upload Error
23.6.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration
information and returns the NWA to its factory defaults as shown on the screen.
The following warning screen will appear.
Figure 180 Reset Warning Message
You can also press the RESET button to reset your NWA to its factory default
settings. Refer to
23.7 Restart Screen
Use this screen to restart the NWA without turning it off and on.
Click Maintenance > Restart. The following screen displays. Click Restart to
have the NWA reboot. This does not affect the NWA's configuration.
Figure 181 Restart Screen
272
Section 2.3 on page 32
for more information.
NWA-3160 Series User's Guide