ZyXEL Communications NWA-3160 User Manual page 334

Appendix E Text File Based Auto Configuration
The AP ignores any improperly formatted commands and continues to check the
next line.
If there are any errors while processing the configuration file, the AP generates a
message with the line number and reason for the first error (subsequent errors
during the processing of an individual configuration file are not recorded). You can
use SNMP management software to display the message by using the following
MIB.
Table 107 Displaying the Auto Configuration Status
ITEM
pwAutoCfgMessage
The commands will be executed line by line just like if you entered them in a
console or Telnet CI session. Be careful to ensure the integrity of the whole AP
configuration. If there are existing settings in the AP, the newly loaded
configuration file will either coexist with the previous settings or replace them.
You can zip each configuration file. You must use the store compression method
and a .zip file extension. When zipping a configuration file, you can also add
password protection using the same password that you use to log into the AP.
Wcfg Command Configuration File Examples
These example configuration files use the wcfg command to configure security
and SSID profiles.
Figure 214 WEP Configuration File Example
!#ZYXEL PROWLAN
!#VERSION 11
wcfg security 1 name Test-wep
wcfg security 1 security wep
wcfg security 1 wep keysize 64 ascii
wcfg security 1 wep key1 abcde
wcfg security 1 wep key2 bcdef
wcfg security 1 wep key3 cdefg
wcfg security 1 wep key4 defgh
wcfg security 1 wep keyindex 1
wcfg security save
wcfg ssid 1 name ssid-wep
wcfg ssid 1 security Test-wep
wcfg ssid 1 l2iolation disable
wcfg ssid 1 macfilter disable
wcfg ssid save
334
OBJECT ID
1.3.6.1.4.1.890.1.9.1.
9
DESCRIPTION
Auto configuration status message string
NWA-3160 Series User's Guide