Appendix A Product Specifications - ZyXEL Communications NWA-3160 User Manual

A
P P E N D I X
The following tables summarize the NWA's hardware and firmware features.
Table 86 Hardware Specifications
Power Specification
Reset button
Ethernet Port
Power over Ethernet
(PoE)
Console Port
Antenna
Operation
Temperature
Storage Temperature
Operation Humidity
Storage Humidity
Dimensions
Distance between the
centers of wall-
mounting holes on
the device's back.
Screw size for wall-
mounting
Table 87 Firmware Specifications
Default IP Address
Default Subnet Mask
Default Password
Wireless LAN Standards
Wireless security
NWA-3160 Series User's Guide
Product Specifications
12 V DC, 1 A
Returns all settings to their factory defaults.
• Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or
full-duplex mode.
• Auto-crossover: Use either crossover or straight-through
Ethernet cables.
IEEE 802.3af compliant.
One MIL-C-5015 style RS-232 console port
SMA antenna connectors, equipped by default with 2dBi omni
antenna, 60°
When facing the front of the NWA, the antenna on the right is
used by wireless LAN adaptor WLAN1, and the antenna on the left
is used by wireless LAN adaptor WLAN2.
0 ~ 50 º C
-30 ~ 60 º C
10 ~ 90 % (non-condensing)
5 ~ 95 % (non-condensing)
212.5mm x 138.5mm x 52mm
80 mm
6mm ~ 8mm (0.24" ~ 0.31") head width.
192.168.1.2
255.255.255.0 (24 bits)
1234
IEEE 802.11a, IEEE 802.11b, IEEE 802.11g
WEP, WPA(2), WPA(2)-PSK, 802.1x
A
281