ZyXEL Communications NWA-3160 User Manual page 193

Table 57 SNMP Traps
TRAP NAME
warmStart
linkDown
linkUp
authenticationFailure
(defined in RFC-1215)
Traps defined in the
ZyXEL Private MIB.
whyReboot
pwTFTPStatus
Some traps include an SNMP interface index. The following table maps the SNMP
interface indexes to the NWA's physical and virtual ports.
Table 58 SNMP Interface Index to Physical and Virtual Port Mapping
TYPE
Physical
NWA-3160 Series User's Guide
OBJECT IDENTIFIER #
(OID)
1.3.6.1.6.3.1.1.5.2
1.3.6.1.6.3.1.1.5.3
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.5
1.3.6.1.4.1.890.1.5.1
3.0.1
1.3.6.1.4.1.890.1.9.2.
3.3.1
INTERFACE
enet0
enet1
enet2
Chapter 16 Remote Management Screens
DESCRIPTION
This trap is sent after booting (software
reboot). This trap is defined in RFC-
1215.
This trap is sent when the Ethernet link
is down.
This trap is sent when the Ethernet link
is up.
The device sends this trap when it
receives any SNMP get or set
requirements with the wrong community
(password).
Note: snmpEnableAuthenTraps, OID
1.3.6.1.2.1.11.30 (defined in RFC 1214
and RFC 1907) must be enabled on in
order for the device to send
authenticationFailure traps. Use a MIB
browser to enable or disable
snmpEnableAuthenTraps.
This trap is sent with the reason for
restarting before the system reboots
(warm start).
"System reboot by user!" is added for an
intentional reboot (for example,
download new files, CI command "sys
reboot").
If the system reboots because of fatal
errors, a code for the error is listed.
This trap is sent to indicate the status
and result of a TFTP client session that
has ended.
PORT
Wireless LAN adaptor
WLAN1
Ethernet port (LAN)
Wireless LAN adaptor
WLAN2
193