Friendly Ap Screen - ZyXEL Communications NWA-3160 User Manual

15.2.1 Friendly AP Screen

Use this screen to specify APs as trusted. Click Rogue AP > Friendly AP. The
following screen appears:
Figure 112 Rogue AP > Friendly AP
The following table describes the labels in this screen.
Table 51 Rogue AP > Friendly AP
LABEL
Add Friendly AP
MAC Address
Description
Add
Friendly AP List
Index
MAC Address
SSID
Channel
Radio Mode
Security
Last Seen
Description
Delete
NWA-3160 Series User's Guide
DESCRIPTION
Use this section to manually add a wireless access point to the list.
You must know the device's MAC address.
Enter the MAC address of the AP you wish to add to the list.
Enter a short, explanatory description identifying the AP with a
maximum of 32 alphanumeric characters. Spaces, underscores
(_) and dashes (-) are allowed.
Click this button to include the AP in the list.
This is the list of safe wireless access points you have already
configured.
This is the index number of the AP's entry in the list.
This field displays the Media Access Control (MAC) address of the
AP. All wireless devices have a MAC address that uniquely
identifies them.
This field displays the Service Set IDentifier (also known as the
network name) of the AP.
This field displays the wireless channel the AP is currently using.
The field displays the radio mode the AP is currently using.
This field displays the type of wireless encryption the AP is
currently using.
This field displays the last time the NWA scanned for the AP.
This is the description you entered when adding the AP to the list.
Click this button to remove an AP's entry from the list.
Chapter 15 Rogue AP Detection
179