ZyXEL Communications NWA-3160 User Manual page 99

Table 15 The Profile Edit > Radio > Edit Screen
LABEL
Rates Configuration
Select SSID Profile
Index
Active
Profile
Enable Antenna
Diversity
Apply
Reset
NWA-3160 Series User's Guide
DESCRIPTION
This section controls the data rates permitted for clients of an AP
using this radio profile.
For each Rate, select an option from the Configuration list. The
options are:
Basic (1~11 Mbps only): Clients can always connect to the
access point at this speed.
Optional: Clients can connect to the access point at this speed,
when permitted to do so by the AP.
Disabled: Clients cannot connect to the access point at this
speed.
Use this section to choose the SSID profile or profiles you want
access points using this radio profile to use. Each AP can use
multiple SSID profiles simultaneously.
Configure SSID profiles in the Profile Edit > SSID screens.
This is the SSID profile's index number.
Select this to use the SSID profile selected in the Profile field.
Select the profile you want to use. Ensure that you also select the
Active box.
Select this to have access points using this radio profile use
antenna diversity, where available. Antenna diversity uses
multiple antennas to reduce signal interference.
Click this to save your changes.
Click this to reload the previous configuration for this screen.
Chapter 6 AP Controller Mode
99