ZyXEL Communications NWA-3160 User Manual page 333

Verifying Your Configuration File Upload Via SNMP
You can use SNMP management software to display the configuration file version
currently on the device by using the following MIB.
Table 105 Displaying the File Version
ITEM
pwCfgVersion
Troubleshooting Via SNMP
If you have any difficulties with the configuration file upload, you can try using the
following MIB 10 to 20 seconds after using SNMP to have the AP download the
configuration file.
Table 106 Displaying the File Version
ITEM
pwTftpOpStatu
s
Configuration File Format
The text based configuration file must use the following format.
Figure 213 Configuration File Format
!#ZYXEL PROWLAN
!#VERSION 12
wcfg security 1 xxx
wcfg security save
wcfg ssid 1 xxx
wcfg ssid save
The first line must be !#ZYXEL PROWLAN.
The second line must specify the file version. The AP compares the file version
with the version of the last configuration file that it downloaded. If the version of
the downloaded file is the same or smaller (older), the AP ignores the file. If the
version of the downloaded file is larger (newer), the AP uses the file.
Configuration File Rules
You can only use the wlan and wcfg commands in the configuration file. The AP
ignores other ZyNOS commands but continues to check the next command.
NWA-3160 Series User's Guide
OBJECT ID DESCRIPTION
1.3.6.1.4.1.890.1.9. This displays the current configuration file
1.2 version.
OBJECT ID DESCRIPTION
1.3.6.1.4.1.890.1.9. This displays the current operating status of the
1.6 TFTP client.
Appendix E Text File Based Auto Configuration
333