Security: Wpa - ZyXEL Communications NWA-3160 User Manual

Table 39 Security: 802.1x Static 64-bit, 802.1x Static 128-bit
LABEL
ReAuthentication
Timer
Idle Timeout
Apply
Reset

10.2.4 Security: WPA

Use this screen to set the selected profile to Wi-Fi Protected Access (WPA) security
mode.Select WPA in the Security Mode field to display the following screen.
Figure 93 Security: WPA
The following table describes the labels in this screen.
Table 40 Security: WPA
LABEL
Profile Name
Security Mode
NWA-3160 Series User's Guide
DESCRIPTION
Specify how often wireless stations have to resend user names and
passwords in order to stay connected.
Enter a time interval between 10 and 9999 seconds. The default
time interval is 1800 seconds (30 minutes). Alternatively, enter
"0" to turn reauthentication off.
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server
has priority.
The NWA automatically disconnects a wireless station from the
wired network after a period of inactivity. The wireless station
needs to enter the user name and password again before access to
the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Type a name to identify this security profile.
Choose WPA in this field.
Chapter 10 Wireless Security Screen
151