ZyXEL Communications NWA-3160 User Manual page 141

Table 34 Configuring SSID
LABEL
QoS
L2 Isolation
Intra-BSS Traffic
blocking
MAC Filtering
Apply
Reset
NWA-3160 Series User's Guide
DESCRIPTION
Displays the Quality of Service priority for this BSS's traffic.
• In the pre-configured VoIP_SSID profile, the QoS setting is
VoIP. This is not user-configurable. The VoIP setting is
available only on the VoIP_SSID profile, and provides the
highest level of QoS.
• If you select WMM from the QoS list, the priority of a data
packet depends on the packet's IEEE 802.1q or DSCP header. If
a packet has no WMM value assigned to it, it is assigned the
default priority.
• If you select ATC from the QoS list, the NWA automatically
assigns priority based on packet size.
• If you select ATC+WMM from the QoS list, the NWA uses WMM
on the wireless network and ATC on the wired network.
• If you select WMM_VOICE, WMM_VIDEO,
WMM_BEST_EFFORT or WMM_BACKGROUND, the NWA
applies that QoS setting to all of that SSID's traffic.
• If you select NONE, the NWA applies no priority to traffic on this
SSID.
Note: When you configure an SSID profile's QoS settings, the
NWA applies the same QoS setting to all of the profile's
traffic.
Select a layer 2 isolation profile from the drop-down list box. If you
do not want to use layer 2 isolation on this profile, select Disable.
Select Enable from the drop-down list box to prevent wireless
clients in this profile's BSS from communicating with one another.
Select a MAC filter profile from the drop-down list box. If you do not
want to use MAC filtering on this profile, select Disable.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
Chapter 9 SSID Screen
141