ZyXEL Communications NWA-3160 User Manual page 327

Select Ethernet built-in from the Connect via list.
2
Figure 209 Macintosh OS 8/9: TCP/IP
For dynamically assigned settings, select Using DHCP Server from the
3
Configure: list.
For statically assigned settings, do the following:
4
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your NWA in the Router address box.
Close the TCP/IP Control Panel.
5
Click Save if prompted, to save changes to your configuration.
6
Turn on your NWA and restart your computer (if prompted).
7
Verifying Settings
Check your TCP/IP properties in the TCP/IP Control Panel window.
NWA-3160 Series User's Guide
Appendix D IP Addresses and Subnetting
327