ZyXEL Communications NWA-3160 User Manual page 242

Chapter 20 VLAN
1Using the Remote Access Policy option on the Internet Authentication Service
management interface, create a new VLAN Policy for each VLAN Group defined in the
previous section. The order of the remote access policies is important. The most specific
policies should be placed at the top of the policy list and the most general at the bottom.
For example, if the Day-And-Time Restriction policy is still present, it should be moved
to the bottom or deleted to allow the VLAN Group policies to take precedence.
1. Right click Remote Access Policy and select New Remote Access
1a
Policy.
Enter a Policy friendly name that describes the policy. Each Remote Access
1b
Policy will be matched to one VLAN Group. An example may be, Allow - VLAN
10 Policy.
Click Next.
1c
Figure 148 New Remote Access Policy for VLAN Group
The Conditions window displays. Select Add to add a condition for this policy to
2
act on.
In the Select Attribute screen, click Windows-Groups and the Add button.
3
Figure 149 Specifying Windows-Group Condition
242
NWA-3160 Series User's Guide