Download
Share
Print this page
ZyXEL Communications NBG-419N Installation Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Modem
  5. NBG-419N
  6. Installation manual
ZyXEL Communications NBG-419N Installation Manual

ZyXEL Communications NBG-419N Installation Manual

Hide thumbs Also See for NBG-419N:

Advertisement

Quick Links

Download this manual See also: User Manual, Setup Manual
NBG-419N ZyXEL Customer

Installation Guide

For Pioneer Telephone Cooperative
Form #496PTC, 03/10

Advertisement

loading

Related Manuals for ZyXEL Communications NBG-419N

Summary of Contents for ZyXEL Communications NBG-419N

  • Page 1: Installation Guide

    NBG-419N ZyXEL Customer Installation Guide For Pioneer Telephone Cooperative Form #496PTC, 03/10...

  • Page 2: Hardware Installation

    Hardware Installation 1. First, connect the DSL modem to the WAN port, located on the back of the NBG-419N, on the far right side next to the antenna. 2. Next, connect any wired computers or devices to any of the four LAN ports, directly to the left of the WAN port.
  • Page 3 Logging In to the NBG-419N 3. Direct your computer’s web browser to 192.168.1.1. When asked for the Password, input 1234. 4. Click Login to begin setting the Wizard Setup (for new routers).
  • Page 4 Wizard Setup – Connect to Internet 5. Click the Connect to the Internet button to start the Internet Detection tool. 6. The Detection tool will attempt to automatically discover what type of Internet connection is coming from the modem (Ethernet, PPPoE, etc.).
  • Page 5 Wizard Setup – Connect to Internet (Cont’d) If the Detection tool discovers the Internet type, it will automatically present the applicable options to complete setup, if any. In the case of PPPoE, you will be asked to enter the PPPoE User Name (typically your Pioneer email address) and Password.
  • Page 6 Wizard Setup – Connect to Internet (Cont’d) For Static IP addresses, you’ll need to insert the IP Address, Subnet Mask, Gateway Address, and Primary / Secondary DNS addresses. 10. If the Detection tool discovers a DHCP internet connection, there are no additional steps. 11.
  • Page 7 Wizard Setup – Router Password 13. You’ll next be asked to change the Admin password. Simply type and confirm the new password, click Next.
  • Page 8 Setup Wizard – Wireless Security 14. We’ll now setup wireless settings. Begin by entering in a name for the SSID (this is the name that wireless computers see). 15. From the Security mode drop-down, select a wireless security method. We recommend WPA- PSK.
  • Page 9 Setup Wizard – Wireless Security (Cont’d) 16. You’ll next enter the WPA Wireless password. The same password will be entered into a computer when it tries to connect wirelessly. Also, Verify the Password in the corresponding field. 17. Click Next.
  • Page 10 Wizard Setup – Finalizing Finally, once settings are applied, you’ll be greeted with the Congratulations screen. Click Go to close the Wizard and proceed to the router’s main Dashboard.

  • Page 11: Advanced Settings

    Advanced Settings – Wireless LAN Setup 19. On the lower right corner of the Dashboard, you can click on Wireless Security to check the NBG-419N’s wireless LAN settings, including SSID, Security Mode, and Wireless password.
  • Page 12 Expert Mode – Wireless Security Setup (WEP) You may have an older wireless devices that may not be compatible with WPA. In this case, you’ll need to use the router’s Expert Mode menus to configure WEP. To access Expert Mode, click on the Expert Mode link in the upper right corner of the Dashboard.
  • Page 13 Expert Mode – Wireless Security Setup (WEP) (Cont’d) 21. In the left margin of the Expert Mode menu, click on the Configuration icon (the icon looks similar to gears). Expand the Network menu and click on the Wireless LAN sub- menu.
  • Page 14 Expert Mode – Wireless Security Setup (WEP) (Cont’d) 22. The menu will now adjust so you may enter the WEP settings. Ensure the WEP Encryption is set to 128-bit. You’ll next enter the WEP Encryption Keys. The same Passphrase will be entered into a computer when it tries to connect wirelessly.
  • Page 15 Expert Mode – WAN continued 23. In Expert Mode, on the left margin menu, you can click on Configuration, then Network, then WAN to verify the NBG-419N’s WAN settings.
  • Page 16 Expert Mode – WAN continued In the Expert Mode under the WAN settings two items need to be changed: 1. Enter 1492 as the MTU Size. 2. Select User-Defined in the drop down menu box and type 64.250.192.64 in the box to the right of User-Defined box.
  • Page 17 Conclusion If your computer utilizes the wireless connection, and you have enabled wireless encryption, then you will need to enter the key or passphrase for the wireless devices to gain network/Internet connectivity. If you need help with the basic setup of this router then please call Pioneer Customer Care,1-800-375-8903.