Displaying And Maintaining The Device Management Configuration - 3Com WX3000 Series Operation Manual

Follow these steps to identify pluggable transceivers:
To do...
Display main parameters of the
pluggable transceiver(s)
Diagnosing pluggable transceivers
The system outputs alarm information for you to diagnose and troubleshoot faults of pluggable
transceivers. When these parameters are abnormal, you can take corresponding measures to prevent
transceiver faults.
Follow these steps to display pluggable transceiver information:
To do...
Display the current alarm
information of the pluggable
transceiver(s)

Displaying and Maintaining the Device Management Configuration

To do...
Display the module type and
operating status of each board
Display CPU usage of the
device
Display the operating status of
the fan
Display memory usage of the
device
Display the operating status of
the power supply
Display system diagnostic
information or save system
diagnostic information to a file
with the extension .diag into the
flash memory
Display enabled debugging on
the current device
Use the command...
display transceiver interface
[ interface-type
interface-number ]
Use the command...
display transceiver alarm
interface [ interface-type
interface-number ]
Use the command...
display device [ manuinfo |
unit unit-id ]
display cpu [ unit unit-id ]
display fan [ unit unit-id
[ fan-id ] ]
display memory [ unit unit-id ]
display power [ unit unit-id
[ power-id ] ]
display
diagnostic-information
display debugging [ unit
unit-id ] [ interface
interface-type
interface-number ]
[ module-name ]
4-4
Remarks
Available for all pluggable
transceivers
Remarks
Available for all pluggable
transceivers
Remarks
Available in any view