Enabling/Disabling The Web Server - 3Com WX3000 Series Operation Manual

Figure 4-5 Banner page displayed when a user logs in to the switching engine through Web
Click Continue to enter user login authentication page. You will enter the main page of the Web-based
network management system if the authentication succeeds.

Enabling/Disabling the WEB Server

Follow these steps to enable/disable the WEB server:
To do...
Enter system view
Enable the Web server
Disable the Web server
To improve security and prevent attack to the unused Sockets, TCP 80 port (which is for HTTP service)
is enabled/disabled after the corresponding configuration.
Enabling the Web server (by using the undo ip http shutdown command) opens TCP 80 port.
Disabling the Web server (by using the ip http shutdown command) closes TCP 80 port.
Use the command...
system-view
ip http shutdown
undo ip http shutdown
4-5
Remarks
—
Required
By default, the Web server is enabled.
Required