Port Security Configuration; Enabling Port Security - 3Com WX3000 Series Operation Manual

Port Security Configuration

Complete the following tasks to configure port security:

Enabling Port Security

Setting the Maximum Number of MAC Addresses
Allowed on a Port
Setting the Port Security Mode
Configuring Port
Security
Features
Ignoring the Authorization Information from the RADIUS
Server
Configuring Security MAC Addresses
Enabling Port Security
Follow these steps to enable port security:
To do...
Enter system view
Enable port security
Enabling port security resets the following configurations on the ports to the defaults (shown in
parentheses below):
802.1x (disabled), port access control method (macbased), and port access control mode (auto)
MAC authentication (disabled)
In addition, you cannot perform the above-mentioned configurations manually because these
configurations change with the port security mode automatically.
For details about 802.1x configuration, refer to the sections covering 802.1x and System-Guard.
For details about MAC authentication configuration, refer to the sections covering MAC
authentication configuration.
Task
Configuring the NTK feature
Configuring intrusion protection
Configuring the Trap feature
Use the command...
system-view
port-security enable
Required
Optional
Required
Optional
Choose one or more features as
required.
Optional
Optional
—
Required
Disabled by default
1-4
Remarks
Remarks