Configuring Monitor Link
Before configuring a Monitor Link group, you must create a Monitor Link group and configure member
ports for it. A Monitor Link group consists of an uplink port and one or multiple downlink ports. The uplink
port can be a manually-configured or static LACP link aggregation group, an Ethernet port, or a Smart
Link group. The downlink ports can be manually-configured link aggregation groups or static LACP link
aggregation groups, or Ethernet ports.
Configuration Task List
Complete the following tasks to configure Monitor Link:
Creating a Monitor Link Group
Configuring the Uplink Port
Configuring a Downlink Port
Creating a Monitor Link Group
Follow these steps to create a Monitor Link group:
To do...
Enter system view
Create a Monitor Link group
Configuring the Uplink Port
Follow these steps to configure the uplink port:
Enter system view
Enter the specified Monitor Link group view
Task
Use the command...
system-view
monitor-link group group-id
To do...
Required
Required
Required
—
Required
Use the command...
system-view
monitor-link group group-id
2-3
Remarks
Remarks
Remarks
—
—