Displaying The Device Management Configuration; Remote Switch App Upgrade Configuration Example - 3Com 4500 Configuration Manual

To do...
Display the current alarm
information of the pluggable
transceiver(s)
Display the currently measured
value of the digital diagnosis
parameters of the anti-spoofing
optical transceiver(s)
customized by H3C

Displaying the Device Management Configuration

To do...
Display the APP to be adopted at
next startup
Display the module type and
operating status of each board
Display CPU usage of a switch
Display the operating status of the
fan
Display memory usage of a switch
Display the operating status of the
power supply
Display system diagnostic
information or save system
diagnostic information to a file with
the extension .diag into the Flash
memory
Display enabled debugging on a
specified switch or all switches in the
fabric
Display enabled debugging on all
switches in the fabric by modules

Remote Switch APP Upgrade Configuration Example

Network requirements
Telnet to the switch from a PC remotely and download applications from the FTP server to the Flash
memory of the switch. Update the switch software by using the device management commands through
CLI.
The switch acts as the FTP client, and the remote PC serves as both the configuration PC and the FTP
server.
Perform the following configuration on the FTP server.
Configure an FTP user, whose name is switch and password is hello. Authorize the user with the
read-write right on the directory Switch on the PC.
Use the command...
display transceiver alarm interface
[ interface-type interface-number ]
display transceiver diagnosis
interface [ interface-type
interface-number ]
Use the command...
display boot-loader [ unit unit-id ]
display device [ manuinfo [ unit
unit-id ] | unit unit-id ]
display cpu [ unit unit-id ]
display fan [ unit unit-id [ fan-id ] ]
display memory [ unit unit-id ]
display power [ unit unit-id [ power-id ] ]
display diagnostic-information
display debugging { fabric | unit
unit-id } [ interface interface-type
interface-number ] [ module-name ]
display debugging fabric by-module
4-5
Remarks
Available for all pluggable
transceivers
Available for anti-spoofing
pluggable optical
transceiver(s) customized
by H3C only
Remarks
Available in any
view.