Configuring The Maximum Transmitting Speed On The Current Port - 3Com WX3000 Series Operation Manual

Configuration procedure
Follow these steps to configure the timeout time factor:
To do...
Enter system view
Configure the timeout time
factor for the device
For a steady network, the timeout time can be five to seven times of the hello time.
Configuration example
# Configure the timeout time factor to be 6.
<device> system-view
[device] stp timer-factor 6

Configuring the Maximum Transmitting Speed on the Current Port

The maximum transmitting speed of a port specifies the maximum number of configuration BPDUs a
port can transmit in a period specified by the hello time parameter. It depends on the physical state of
the port and network structure. You can configure this parameter according to the network.
Configure the maximum transmitting speed for specified ports in system view
Follow these steps to configure the maximum transmitting speed for specified ports in system view:
To do...
Enter system view
Configure the maximum
transmitting speed for specified
ports
Configure the maximum transmitting speed in Ethernet port view
Follow these steps to configure the maximum transmitting speed in Ethernet port view:
To do...
Enter system view
Enter Ethernet port view
Configure the maximum
transmitting speed
As the maximum transmitting speed parameter determines the number of the configuration BPDUs
transmitted in each hello time, set it to a proper value to prevent MSTP from occupying too many
network resources. The default value is recommended.
Use the command...
system-view
stp timer-factor number
Use the command...
system-view
stp interface interface-list
transmit-limit packetnum
Use the command...
system-view
interface interface-type
interface-number
stp transmit-limit packetnum
1-25
Remarks
—
Required
The timeout time factor defaults to 3.
Remarks
—
Required
The maximum transmitting
speed of all Ethernet ports on a
device defaults to 10.
Remarks
—
—
Required
The maximum transmitting
speed of all Ethernet ports on a
device defaults to 10.