3Com WX3000 Series Operation Manual page 234

To do...
In system
view
Enable
802.1x for
specified
In port
ports
view
Set port authorization
mode for specified
ports
Set the access control
method for specified
ports
Set authentication
method for 802.1x
users
Enable online user
handshaking
Enter Ethernet port
view
Enable the
handshaking packet
secure function
Use the command...
dot1x [ interface interface-list ]
interface interface-type interface-number
dot1x
quit
dot1x port-control { authorized-force |
unauthorized-force | auto } [ interface
interface-list ]
dot1x port-method { macbased |
portbased } [ interface interface-list ]
dot1x authentication-method { chap |
pap | eap }
dot1x handshake enable
interface interface-type interface-number
dot1x handshake secure
1-13
Remarks
Required
By default, 802.1x is
disabled on all ports.
Optional
By default, an
802.1x-enabled port
operates in the auto mode.
Optional
The default access control
method on a port is
MAC-based (that is, the
macbased keyword is used
by default).
Optional
By default, the device
performs CHAP
authentication in EAP
terminating mode.
Optional
By default, online user
handshaking is enabled.
—
Optional
By default, the handshaking
secure function is disabled.