3Com WX3000 Series Operation Manual page 620

To do...
Configure the destination IP
address
Configure dns-server
Configure the source IP
address
Configure the source port
Configure the test type
Configure the number of
probes per test
Configure the maximum
number of history records that
can be saved
Configure the automatic test
interval
Configure the probe timeout
time
Configure the type of service
Configure the type of HTTP
operation
Start the test
Display test results
Use the command...
destination-ip ip-address
dns-server ip-address
source-ip ip-address
source-port port-number
test-type http
count times
history-records number
frequency interval
timeout time
tos value
http-operation { get | post }
test-enable
display hwping results
[ admin-name operation-tag ]
1-9
Remarks
Required
You can configure an IP
address or a host name.
By default, no destination
address is configured.
Required when you use the
destination-ip command to
configure the destination
address as the host name.
By default, no IP address of the
DNS server is configured.
Optional
By default, no source IP
address is configured.
Optional
By default, no source port is
configured.
Required
By default, the test type is
ICMP.
Optional
By default, each test makes
one probe.
Optional
By default, the maximum
number is 50.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Optional
By default, a probe times out in
three seconds.
Optional
By default, the service type is
zero.
Optional
By default, the type of HTTP
operation is get, that is, the
HTTP operation will get data
from the HTTP server.
Required
Required
You can execute the command
in any view.