Configuring The Client Public Key On The Server - 3Com WX3000 Series Operation Manual

To do...
Enter system view
Set SSH authentication timeout
time
Set SSH authentication retry
times
Set RSA server key update
interval
Configure SSH server to be
compatible with SSH1.x clients
Configure a login header
You can configure a login header only when the service type is stelnet. For configuration of service
types, see Specifying a Service Type for an SSH
For details of the header command, see the corresponding section in Login Command.

Configuring the Client Public Key on the Server

This configuration is not necessary if the password authentication mode is configured for SSH users.
With the publickey authentication mode configured for an SSH client, you must configure the client's
RSA or DSA host public key(s) on the server for authentication.
You can manually configure the public key or import it from a public key file. In the former case, you can
manually copy the client's public key to the server. In the latter case, the system automatically converts
the format of the public key generated by the client to complete the configuration on the server, but the
client's public key should be transferred from the client to the server beforehand through FTP/TFTP.
Follow these steps to configure the client's public key manually:
To do...
Enter system view
Enter public key view
Use the command...
system-view
ssh server timeout seconds
ssh server
authentication-retries times
ssh server rekey-interval
hours
ssh server compatible-ssh1x
enable
header shell text
User.
Use the command...
system-view
public-key peer keyname
1-9
Remarks
—
Optional
By default, the timeout time is
60 seconds.
Optional
By default, the number of retry
times is 3.
Optional
By default, the system does not
update RSA server keys.
Optional
By default, SSH server is
compatible with SSH1.x clients.
Optional
By default, no login header is
configured.
Remarks
—
Required