3Com WX3000 Series Operation Manual page 618

To do...
Configure the source
interface
Configure the test type
Configure the number of
probes per test
Configure the maximum
number of history records
that can be saved
Configure the probe timeout
time
Start the test
Display test results
3) Configuring FTP test on HWPing client
Follow these steps to configure FTP test on HWPing client:
To do...
Enter system view
Enable the HWPing client
function
Create a HWPing test group
and enter its view
Configure the destination IP
address
Configure the source IP
address
Configure the source port
Configure the test type
Use the command...
source-interface
interface-type
interface-number
test-type dhcp
count times
history-records number
timeout time
test-enable
display hwping results
[ admin-name operation-tag ]
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation-tag
destination-ip ip-address
source-ip ip-address
source-port port-number
test-type ftp
1-7
Remarks
Required
You can only configure a VLAN
interface as the source interface.
By default, no source interface is
configured.
Required
By default, the test type is ICMP.
Optional
By default, each test makes one
probe.
Optional
By default, the maximum number is
50.
Optional
By default, a probe times out in three
seconds.
Required
Required
You can execute the command in
any view.
Remarks
—
Required
By default, the HWPing client
function is disabled.
Required
By default, no test group is
configured.
Required
By default, no destination address
is configured.
Required
By default, no source IP address
is configured.
Optional
By default, no source port is
configured.
Required
By default, the test type is ICMP.