Plate Nic Board (Option For Bizhub 161/160F/161F) - Konica Minolta bizhub 160 Service Manual

6. Other
6.3.9

Plate NIC Board (Option for bizhub 161/160f/161f)

1. Remove the Rear Cover.
☞ 32
2. Remove the NIC Board. (only when the option NC-501 is mounted)
☞ 34
3. Remove the NCU Board.
☞ 34
4. Remove the PCL Board. (bizhub 161/161f only)
☞ 35
38
12. Remove the seven screws.
13. Remove the Interface Board.
4980D066AA
5. Unplug the five connectors on the
Controller/Mechanical Control
Board.
4980D063AB
6. Unplug the connector on the Plate
NIC Board.
1383U007AB
7. Remove the two screws.
8. Remove the Left Rear Cover.
4980U044AA
Field Service Ver. 1.0 Apr. 2005