Plate Nic Board (Option For Bizhub 161/160F/161F) - Konica Minolta bizhub 160f Service Manual

Hide thumbs Also See for bizhub 160f:

Table of Contents

Plate NIC Board (Option for bizhub 161/160f/161f)

1. Remove the Rear Cover.

2. Remove the NIC Board. (only when the option NC-501 is mounted)

3. Remove the NCU Board.

4. Remove the PCL Board. (bizhub 161/161f only)

Confidential – for internal use only, do not distribute

Field Service Ver. 1.0 Apr. 2005

12. Remove the seven screws.

13. Remove the Interface Board.

5. Unplug the five connectors on the

Controller/Mechanical Control

6. Unplug the connector on the Plate

7. Remove the two screws.

8. Remove the Left Rear Cover.

Table of Contents

Bizhub 161 Bizhub 161f Bizhub 160