Replacing The Unit; Replacement Of The Toner Cartridge - Konica Minolta bizhub 160 Service Manual

Field Service Ver. 1.0 Apr. 2005
3.5

Replacing the Unit

3.5.1

Replacement of the Toner Cartridge

A. Removal Procedure
1. Remove the Imaging Cartridge.
2. Pull the lever of the Toner Cartridge
in the direction shown in the illustra-
tion and disconnect the Toner Car-
tridge from the Drum Cartridge.
NOTE
• If the Drum Cartridge is to be
4136E007AC
placed on a floor or similar place,
use care to prevent toner from scat-
tering around.
B. Reinstallation Procedure
1. Take out a new Toner Cartridge and
shake it in the horizontal direction
sufficiently so that toner is agitated.
NOTE
• Placing the Toner Cartridge in an
upright position or shaking it vigor-
ously will spill toner.
4136E008AA
2. Remove the protective cover from
the Toner Cartridge.
C4136o049AC
3. Install the new Toner Cartridge to the
Drum Cartridge.
NOTE
• Insert the Toner Cartridge along the
guide provided on the Drum Car-
tridge side and make sure that the
Toner Cartridge is not tilted when
inserted.
4136E009AC
3. Periodical check
17