6. Other
1
Precautions for Removal/Reinstallation of the PH Unit
• NEVER touch the window on the backside of the PH Unit. A dirty window can
cause an image problem.
6.3.14
Original Cover Set Sensor
1. Remove the Original Cover.
2. Remove the Control Panel.
☞ 36
6.3.15
Upper Cover Assy. (Original Glass)
1. Remove the Original Cover.
2. Remove the Control Panel.
☞ 36
44
2
3
4136D008AC
4980D073AA
4980D017AB
Field Service Ver. 1.0 Apr. 2005
8. Remove three screws.
9. Remove the PH Unit.
NOTE
• When reinstalling the PH Unit,
tighten the screws in the numerical
order shown in the illustration.
Window
4136D009AB
3. Remove the Original cover set sen-
sor.
3. Remove the six screws.
4. Remove the Upper Cover Assy.
(Original Glass).