Direct Fax Sending (Gateway Tx); Pagescope Web Connection - Konica Minolta bizhub 160 Service Manual

Field Service Ver. 1.0 Apr. 2005
4.4.4

Direct Fax Sending (Gateway TX)

No. Condition
Data does not arrive
at the copier.
1
A fax cannot be sent
2 from this copier.
4.4.5

PageScope Web Connection

No. Condition
A connection with
PageScope Web Con-
nection cannot be
established.
1
Could not login using
Administrator mode.
2
The text in the window
is disorganized.
3
Some deleted charac-
4 ters remain in the win-
dow.
The number of digits
in an input or display
area and the number
5 of characters that can
be registered are dif-
ferent.
Cause
The Unimessage Pro I-Net
Portal settings are incorrect.
Since the size of the received
data is large, it cannot be
received due to the server's
limitations.
The communication mode for
gateway transmissions is
incorrectly specified.
Cause
The IP address for the device
is not specified correctly.
The URL setting in the Web
browser is incorrect.
The settings in the Web
browser are incorrect.
If a proxy is specified with the
browser and the IP address of
this copier cannot be recog-
nized by the proxy server, the
PageScope Web Connection
window cannot be displayed.
The LAN cable is damaged.
Before this login, a different
user name and password had
been entered.
The browser is too small.
An appropriate font size is not
selected.
Operations differ depending
on the browser used.
Depending on the browser,
scroll within the input area. If
this is not possible, this
should not affect the actual
setting operation, although it
may be a problem for display-
ing.
4. Malfunctions/Warning
Action
Check the Unimessage Pro I-Net Portal
settings.
Reduce the size of the data, for exam-
ple, by decreasing the number of pages,
and then try sending again.
The "GATEWAY TX" parameter must be
set to "ENABLE", and the communica-
tion mode must be set correctly.
Action
Specify the IP address.
In the "Address" box, type the IP
address of the specified device.
Even though the device can be
accessed, certain settings must be
specified according to the network con-
figuration in order to establish a connec-
tion. For details, contact your network
administrator.
Use the proxy settings in the browser to
add the IP address of this copier to the
list of exceptions that will not use the
proxy server.
Replace the LAN cable.
Once login is successful, that user
name and password is saved in the
browser until the browser is closed.
Close the browser, and then start it up
again.
Increase the size of the browser.
Specify an appropriate font size for the
computer and browser.
Reload the browser window or rescan.
—
13