Interface Board - Konica Minolta bizhub 160 Service Manual

Field Service Ver. 1.0 Apr. 2005
6.3.8

Interface Board

1. Remove the Rear Cover.
☞ 32
2. Remove the NCU Board. (bizhub 160f/161f only)
☞ 34
3. Remove the PCL Board. (bizhub 161/161f only)
☞ 35
*
*
4980D063AB
4980U044AA
4980E008AA
4980D065AA
4. Unplug the three connectors on the
Controller/Mechanical Control
Board. (For bizhub 160/161)
5. Unplug the five connectors on the
Controller/Mechanical Control
Board. (For bizhub 160f/161f)
NOTE
• The two connectors marked with
"*" in the illustration are provided
for bizhub 160f/161f only.
6. Remove the two screws.
7. Remove the Left Rear Cover.
8. Remove the three screws.
9. Remove the Circuit Board and Metal
Bracket.
10. Remove the two screws.
11. Remove the Protective Metal Bracket
for the Interface Board.
6. Other
37