12. Service Mode (bizhub 160/bizhub 161)
12.3 Service Mode functions
12.3.1
SERVICE'S CHOICE
• Various machine service functions can be specified.
A. SHIPMENT DESTINATION
Functions / Use
• To switch the fixed zoom ratios and paper sizes according to the selected mar-
Setting/Procedure • The default setting is either "METRIC" or "INCH."
B. LEADING EDGE ERASE
Functions
• To change the laser emission timing to adjust the width of the image area that is
Use
• When the PH unit has been replaced
• When the user requests a smaller margin
Adjustment Speci-
fication
Adjustment
To reduce the margin........ Decrease the setting.
Instruction
To increase the margin..... Increase the setting.
Adjustment
1. Enter Service's Choice in the Service mode.
Procedure
2. Select "LEADING EDGE ERASE."
3. Specify the setting.
4. Specify settings for the "TRAILING EDGE ERASE" and the "VERTICAL EDGE
104
keting area.
METRIC
erased at the leading edge.
A
4022D503AA
ERASE" functions in the same way.
Field Service Ver. 1.0 Apr. 2005
INCH
•Specify the amount erased at the leading
edge (width of A) of the paper.
Specifications
0 ± 2.0 mm
Setting Range
0 to 5 (1 increment = 1 mm)
The default setting is "4" mm