Removing Staple Waste
This section describes how to remove staple waste when using the Finisher SR5030 or Booklet Finisher
SR5040.
• While " Waste Staple Receptacle Full" is displayed, you cannot use the staple function.
• " Waste Staple Receptacle Full" is displayed until the staple waste box is reinstalled.
• If the message is still displayed, reinstall the staple waste box.
Open the finisher front
cover.
Pull out the staple
waste box.
Remove staple waste.
Reinstall the staple
waste box.
Close the finisher front
cover.
Removing Staple Waste
CAL135
97
4