Ps Menu - Ricoh SP 5200S Operating Instructions Manual

PS Menu

This section describes the user tools in the PS Menu under Printer Features.
Job Timeout
You can specify how long the printer waits (in seconds) before canceling the current job when the
job is interrupted while being processed.
Default: [Use Driver / Command]
If you select [Use Machine Setting(s)], enter a value between 0 and 999.
Default: "0"
When set to "0", the current job will not be canceled when interrupted.
Wait Timeout
You can specify how long the printer waits (in seconds) before it cancels receiving the job when the
printer cannot detect the end of the job.
Default: [Use Driver / Command]
If you select [Use Machine Setting(s)], enter a value between 0 and 999.
Default: "300"
When set to "0", the print job will not be canceled when the end of the job cannot be detected.
Data Format
You can select a data format.
Default: [TBCP]
Resolution
You can set the print resolution in dots per inch.
Default: [600 dpi (Fast)]
Orientation Auto Detect
You can specify whether or not the machine automatically detects the print orientation of received
images.
If you select [On], the machine detects the orientation (Portrait/Landscape) of the received image
and automatically applies the correct print orientation.
Default: [On]
• To change default settings, see "Accessing User Tools".
• p.149 "Accessing User Tools"
PS Menu
6
163