Ricoh SP 5200S Operating Instructions Manual page 33

The [Found New Hardware] dialog box appears.
4. Click [Locate and install driver software (recommended)].
If the [User Account Control] dialog box appears, click [Continue].
5. Click [Browse my computer for driver software (advanced)].
6. Insert the provided CD-ROM into the computer's CD-ROM drive.
If the [AutoPlay] dialog box appears, click the [Close] button.
7. Click [Browse...], and then specify a location for the printer driver.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
• PCL 5e
D:\x86 or X64\DRIVERS\PCL5e\XP_VISTA or X64\(Language)\DISK1
• PCL 6
D:\x86 or X64\DRIVERS\PCL6\XP_VISTA or X64\MUI\DISK1
• PostScript 3
D:\x86 or X64\DRIVERS\PS\XP_VISTA or X64\MUI\DISK1
The PCL 6 printer driver is installed in the language specified by your operating system.
8. Click [Next].
If the [Windows can't verify the publisher of this driver software] message appears, click [Install this
driver software anyway].
9. Click [Close].
If installation is successful, the icon of the printer connected to the WSD port is added to the
[Printers] window.
• The port name that follows "WSD" uses random character strings. It cannot be changed freely.
• To stop installation of the selected driver, click [Cancel] before the installation is complete. When
re-installing the WSD Port, right-click the machine's icon in the [Network] window, and then click
[Uninstall].
Windows 7, Windows Server 2008 R2 - WSD port
1. Quit all applications currently running.
2. On the [Start] menu, click [Computer].
3. Click [Network].
4. Right-click the machine's icon, and then click [Install].
Driver installation starts automatically.
Installing the Printer Driver for the Selected Port
1
31