Ps Menu - Ricoh Aficio MP 2510 Operating Instructions Manual

PS Menu

This section describes the user tools in the PS Menu under Printer Features.
Default settings are shown in bold type.
This menu appears only when the PostScript 3 option is installed.
❖ Data Format
You can select a data format.
The default setting is TBCP.
This setting is not effective when operating the machine with a parallel or
EtherTalk connection.
When operating the machine with a parallel connection, and also if the binary
data is sent from the printer driver, the print job is canceled.
When operating the machine with an Ethernet connection, the print job is can-
celed under the following conditions:
• The printer driver data format is TBCP, and the data format selected on the
display panel is Binary Data.
• The printer driver data format is binary, and the data format selected on
the display panel is TBCP.
❖ Resolution
You can set the print resolution in dots per inch.
The default setting is 600 dpi.
Reference
p.3 "Accessing User Tools"
PS Menu
5
171