Pcl Menu - Ricoh SP 5200S Operating Instructions Manual

PCL Menu

This section describes the user tools in the PCL Menu under Printer Features.
Orientation
You can set the page orientation.
Default: [Portrait]
Form Lines
You can set the number of lines per page.
The number of lines can be specified from 5 to 128 by increments of one.
Default:
• (mainly Europe and Asia)
"64" lines
• (mainly North America)
"60" lines
Font Source
You can set the storage location of the default font.
Default: [Resident]
[RAM], [HDD] and [SD] can be selected only when fonts have been downloaded to the machine.
Font Number
You can set the ID of the default font you want to use.
• When [Resident] is selected under [Font Source]:
The font number can be specified from 0 to 63 by increments of one.
Default: "0"
• When [RAM], [HDD], or [SD] is selected under [Font Source]:
The font number can be specified from 1 up to number of fonts stored on the machine.
Default: "1"
Point Size
You can set the point size you want to use for the selected font.
The number of point sizes can be specified from 4.00 to 999.75 by increments of 0.25.
This setting is effective only with variable-space fonts.
Default: "12.00" points
Font Pitch
You can set the number of characters per inch for the selected font.
PCL Menu
6
161