Quick Install - Ricoh SP 5200S Operating Instructions Manual

Quick Install

You can install the printer drivers easily from the CD-ROM provided with this machine.
Using Quick Install, the PCL 6 printer driver is installed under network environment, and the Standard
TCP/IP port will be set.
• Manage Printers permission is required to install the drivers. Log on as an Administrators group
member.
• If you connect using USB, see "Installing the Printer Driver Using USB" and install the printer driver.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
4. Click [Quick Install].
The software license agreement appears in the [License Agreement] dialog box.
5. After reading the agreement, click [I accept the agreement.], and then click [Next >].
6. Select the machine model you want to use in the [Select Printer] dialog box.
For network connection via TCP/IP, select the machine whose IP address is displayed in [Connect
To].
7. Click [Install].
If the [Hardware Installation] message appears, click [Continue Anyway].
The printer driver installation starts.
The PCL 6 printer driver is installed in the language specified by your operating system.
8. Click [Finish].
A message about restarting the computer appears. Restart the computer to complete installation.
9. Click [Exit] in the first dialog box of the installer, and then take out the CD-ROM.
• To stop installation of Quick Install, click [Cancel] before installation is complete.
• Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe"
on the CD-ROM root directory.
• p.46 "Installing the Printer Driver Using USB"
• p.50 "Making Option Settings for the Printer"
Quick Install
1
23